Don't use for primary motor feedback connection!
A 5 V A quad B encoder, or the encoder emulation output of another drive can be connected to this input and used as a commander encoder, dual loop feedback, gearing or camming input. Parameter setting FB2.MODE = 0, FB2.SOURCE=1.
|
|
Don't use for primary motor feedback connection! |
Connection Diagram
A 24 V A quad B encoder can be connected to the digital inputs 1 and 2 and used as a commander encoder, dual loop feedback, gearing or camming input.
Parameter setting FB2.MODE = 0, FB2.SOURCE=2.
|
|
Don't use for primary motor feedback connection! |
Connection Diagram
A single-turn or multi-turn encoder with EnDat 2.2 can be connected to this input and used as a commander encoder, dual loop feedback, gearing or camming input.
Parameter setting FB3.MODE=0, DRV.EMUEMODE=11.
|
|
Can be used as primary motor feedback connectio |
Connection Diagram
|
Stay Connected with Kollmorgen       
|
Copyright © 2015 Kollmorgen™ |
|